Quartus Prime is the software that keeps on giving. To make this even more annoying, I sometimes have to enlarge the Quartus Programming window otherwise, the program would hang. sudo apt install libcanberra-gtk-module libcanberra-gtk3-module For example, I had to install the following libraries. If you get any error messages about missing libraries when starting Quartus, make sure to install them. You can now write the following command in the terminal window jtagconfigĪnd if you don’t get any errors and the system recognizes the USB-Blaster hardware, you should now be able to download bitstreams from Quartus to your FPGA board. Restart the machine, connect your Terasic FPGA board with a USB cable, and open a terminal window.

Open a terminal window and write this command: sudo ln -s /lib64/libudev.so.1 /lib64/libudev.so.0 You need to add a soft link so the software can find a library. It seems this is an old bug that Intel hasn’t managed to fix for several release versions. Well, that didn’t work, but it is probably a good idea to have this file installed. So I added the file /etc/udev/rules.d/les and put the following text into the file to allow a regular user to access the Terasic FPGA board. After searching the net, I found information on setting up the computer so that you don’t need to run the JTAG as root. USB-Blaster “unable to scan device chain” Error MessageĪfter installing the software, I tried to use the programmer to connect my development board, but I got the error Unable to scan device chain. I think there is a setting somewhere to lower the frequency.

Check the signal integrity of the jtag clock. I’ve written them down here for later reference, and maybe you have the same install problems, so this might help. The blaster II runs at a higher jtag clock frequency than the older ones. Now the display works, but there’s a lot of other problems, like getting the dreaded error message: “USB-Blaster unable to scan device chain”. So I installed it on my Linux Ubuntu 18.04 machine instead.

The Windows version doesn’t work with high-resolution screens when using scaling the text is cut off on the display. So I got myself two Terasic boards, one Terasic DE10-Nano for testing out the excellent MiSTer FPGA hardware arcade/computer/console emulator and a simpler DE0-Nano for beginning to learn Verilog.īut the software used, called Intel Quartus Prime 19.1, is truly horrible. The GigaDevice GD32V device is a 32-bit general-purpose microcontroller based on the RISC-V core with an impressive balance of processing power, reduced power consumption and peripheral set.I’ve decided to learn how to program FPGA:s.

Positive Supply Voltage - Power supply for JTAG interface drivers debug_tool = altera-usb-blaster upload_protocol = altera-usb-blaster Compilation database compile_commands.json.TIAO USB Multi-Protocol Adapter (TUMPA).

Terasic usb blaster ii